SCR - B carrier has high hydrothermal stability, high stack ratio and high strength, which is suitable for continuous reforming Pt-based catalyst carrier.

Product technical indicators:

item	unit	SCR-B target
Al₂O₃	m%	＞98%
BET surface	㎡/g	190±10
Pile ratio	g/ml	0.66±0.02
Crushing strength	N/Each capsule	≥40
Wear rate	%	＜4
Particle size distribution	Φ1.6～1.8mm	＞98%
Defect rate	m%	＜0.5%
Sn/ Al₂O₃	m%	0.31±0.03
Si/ Al₂O₃	ppm	＜200
Fe/ Al₂O₃	ppm	＜200
Na/ Al₂O₃	ppm	＜70

① For bulk ratio and strength test, the sample shall be baked at 600 ℃ for 2 hours and then tested in a dry atmosphere.

② SCR - B support is suitable for manufacturing all continuous reforming catalysts.

Product packaging

I. The special iron barrel is sealed and packed, and the inner layer is made of moisture-proof plastic bags, with a net weight of 100kg/barrel;

2. Packed in half-ton bags, lined with moisture-proof material bags, net weight 500 kg/bag.

Precautions for storage, transportation and use

I. Pay attention to waterproof and moisture-proof, and prohibit contact with other chemicals and hydrocarbon substances;

II. Do not drop or roll the iron bucket during handling;

III. When the product is used, the water absorption should be tested correctly to avoid rapid moisture absorption in wet weather affecting the impregnation load.

Inquiry Cart 0